R-Go 分离式人体工程学键盘, QWERTY (Nordic), 黑色, 有线


其紧凑的设计确保了在使用键盘和鼠标时, 您的手始终保持在肩宽范围内。这两个分离的键盘组件可以放置在任何适合手腕摆放的位置。这种独特的设计可防止手臂曲张, 并确保肩部、肘部和手腕处于自然和放松的状态。并且这款键盘得益于它的轻击键, 使得您打字的时候保持最小的肌肉张力。纤薄的设计确保了您打字的时候手和手腕处于一个放松, 平坦的位置。键盘重量轻, 并且由于它由两部分组成, 可以折叠放进任何笔记本电脑包。

  • The keyboard is compact

  • The keyboard consists of two separate parts

  • Light keystroke

  • Thin design

  • Lightweight


Model and function
Model:Split keyboard
Keyboard layout:QWERTY (Nordic)
Other options:Integrated numeric keyboard
Cable Length (mm):1500
USB version:USB 2.0
System requirements
Installation:Plug & play
Compatibility:Windows, Linux
Length (mm):288
Width (mm):137
Height (mm):9
Weight (gram):296
Product material:Aluminium
Serie:R-Go Split
Logistical information
Package dimensions (LxWxH in mm):228 x 169 x 30
Gross weight (in grams):550
Carton Size (mm):480 x 345 x 190
Carton weight (grams):11614
Quantity in carton:20
HS code (tariff):84716060
Country of origin:China


  • I get the following error: "The last usb device that you connected malfunctioned, windows does not recognize it.", what should I do?

    Press or click the windows button in the left down corner of your screen, then search for "Bluetooth and other devices" and click the result. You will be redirected to the settings screen. Click on the USB Keyboard driver and delete it. Than disconnect and redirect the keyboard to your devices. The drivers will be reinstalled and everything should work now.

  • My Caps Lock key is only working for the left side of the keyboard. The Shift-keys are only working for the same part of the keyboard, not for both sides. Can this be fixed?

    You're probably using a system with MacOS installed on it. Unfortunately MacOS doesn't let the computer use two keyboard (parts) with one wire which causes the issue that some keys on the one part, aren't working for the other part. But, this can be fixed. Follow the steps below:

    • Download the application Karabiner-Elements here
    • Install the application and open it.
    • Make sure you are on the tab named 'Simple Modifications' at the top of the window.
    • At the bottom left side you see a button named 'Add item'. Click on it, and you will see a new line appear in the field above the button.
    • Under 'From key', click on the selector and select 'left_shift'. Now click on the selector under 'To key' and select 'right_shift'.
    • Click 'Add item' at the bottom left side again, a new line will show up in the field above.
    • Under 'From key', click on the newest selector and select 'right_shift'. Now click on the newest selector under 'To key' and select 'left_shift'.
    • If you did everything correctly, it should look like this image: KarabinerElements.png
      • Your keyboard should work fine now. If it is still not working, try to reboot your computer or send us a message here

  • Have other questions?